Sándor,

Sorry its still early here (US), searched the web for UserSyncLDAPMap and
found that The DB line is normally commented out.  So would not think that
is you issue. I searched my 2.2 config and found that I do not have a
UserSyncLDAPMap in it.  When I did my 2.2 LDAP, I started from the default
Config.pm and worked my way through using the 2.2 HTML manual from the
website.

Again, in the past when I have seen the Panic statement I have found the
problem to be in the Map command.  Following is a cut and paste from mine.
        Map => [
            # note: Login, Email and CustomerID needed!
            # var, frontend, storage, shown (1=always,2=lite), required,
storage-type, http-link, readonly
            [ 'UserSalutation', 'Title',      'title',           1, 0,
'var', '', 0 ],
            [ 'UserFirstname',  'Firstname',  'givenname',       1, 1,
'var', '', 0 ],
            [ 'UserLastname',   'Lastname',   'sn',              1, 1,
'var', '', 0 ],
            [ 'UserLogin',      'Username',   'uid',             1, 1,
'var', '', 0 ],
            [ 'UserEmail',      'Email',      'mail',            1, 1,
'var', '', 0 ],
            [ 'UserCustomerID', 'CustomerID', 'confirm',            0, 1,
'var', '', 0 ],
#            [ 'UserCustomerIDs', 'CustomerIDs', 'second_customer_ids', 1,
0, 'var', '', 0 ],
            [ 'UserPhone',      'Phone',      'telephonenumber', 1, 0,
'var', '', 0 ],
            [ 'UserAddress',    'Address',    'postaladdress',   1, 0,
'var', '', 0 ],
            [ 'UserComment',    'Comment',    'description',     1, 0,
'var', '', 0 ],
        ],
    };

If I recieved the message I would verify that in my example, givenname was
actually in LDAP and contained the first name of the user.  You may want to
post the entire LDAP section from your Config.pm with any usernames/password
changed.

Sorry everyone for the poor prior post, again its early here :)

Have Fun.

Greg Horne
geh
gehorne

-----Original Message-----
From: otrs-bounces@otrs.org [mailto:otrs-bounces@otrs.org]On Behalf Of
Sándor Fehér
Sent: Thursday, July 12, 2007 2:00 AM
To: User questions and discussions about OTRS.org
Subject: Re: [otrs] LDAP auth problem

Sándor Fehér írta:

Some additional info. I downgraded to 2.1.6 and it works fine with that.
Here is the relevant part of my Config.pm

  # $DIBI$
    $Self->{'SystemID'} = 10;
    $Self->{'SecureMode'} = 1;
    $Self->{'Organization'} = 'Blue System ';
    $Self->{'LogModule::LogFile'} = '/opt/otrs/var/otrs.log';
    $Self->{'LogModule'} = 'Kernel::System::Log::SysLog';
    $Self->{'FQDN'} = 'mail.office.bluesystem.hu';
    $Self->{'DefaultLanguage'} = 'hu';
    $Self->{'DefaultCharset'} = 'iso-8859-2';
    $Self->{'AdminEmail'} = 'sfeher@bluesystem.hu';
    $Self->{'AuthModule'} = 'Kernel::System::Auth::LDAP';
    $Self->{'AuthModule::LDAP::Host'} = '192.168.1.9';
    $Self->{'AuthModule::LDAP::BaseDN'} =
'ou=Staff,dc=office,dc=bluesystem,dc=hu';
    $Self->{'AuthModule::LDAP::UID'} = 'uid';
    $Self->{'AuthModule::LDAP::UserAttr'} = 'uid';
    $Self->{'AuthModule::LDAP::Params'} = {
        port => 389,
        timeout => 120,
        async => 0,
        version => 3,
    };

        $Self->{UserSyncLDAPMap} = {
                # DB -> LDAP
                Firstname => 'givenName',
                Lastname => 'sn',
                Email => 'mail',
       };

        $Self->{UserSyncLDAPGroups} = [
                    'users',
          ];

    $Self->{DatabaseUserTable} = 'system_user';
    $Self->{DatabaseUserTableUserID} = 'id';
    $Self->{DatabaseUserTableUserPW} = 'pw';
    $Self->{DatabaseUserTableUser} = 'login';

And the log I get.

[Thu Jul 12 07:55:28 2007][Notice][Kernel::System::Auth::LDAP::Auth]
User: sfeher (uid=sfeher,ou=St
[Thu Jul 12 07:55:28 2007][Notice][Kernel::System::User::GetUserData]
Panic! No UserData for user:
[Thu Jul 12 07:55:28 2007][Error][Kernel::System::User::UserAdd][229]
Need UserFirstname!
[Thu Jul 12 07:55:28 2007][Error][Kernel::System::Auth::LDAP::Auth][385]
Can't create user 'sfeher'
[Thu Jul 12 07:55:28 2007][Notice][Kernel::System::User::GetUserData]
Panic! No UserData for user:

Regards., Sandor